Ejk

Discussion in 'TFI Questions Answered By Dobeck' started by rabbit07, Nov 25, 2014.

  1. rabbit07

    rabbit07 New Member

    2
    0
    0
    Hello all Harley fans new to the HD talking forum just thought I would chime in on my experience with the gen 3 ejk By Dobeck performance, installed mine on a 2007 ultra classic 96" in its own right has problems from the factory being one of the first 96" motors. Bought the bike used had no clue what had been done to it , had no o2 sensors on it and ran lousy , friend of mine told me of this tuner and thought I would give a try, soon as I started the bike could tell a difference after riding a short trip and doing a very small adjustment had the bike purring like a kitten , now I"am going to upgrade to a 103 and cams also upgrading to a gen 4 system Will let you know how that works out real soon . Bottom line is I recommend these units to any and everyone for something simple and easy to understand That doesent take a Rocket scientist to manage it and just plain works! Just My Two Cents,:D Thanks
     
    Last edited by a moderator: Nov 25, 2014
  2. stray dog

    stray dog Junior Member

    443
    26
    0
    Thanks for the post. Always good to here success stories. :D

    Are you doing the build yourself? What cams?

    Keep us updated on the build.
     
  3. rabbit07

    rabbit07 New Member

    2
    0
    0
    doing the build my self , I do my own porting and all my own wrenching Andrews 48h cams true dual exhaust. trying different slipons , and of course dobeck gen4 have together real soon will check back then ,see ya :)
     
  4. turnerbend

    turnerbend Active Member

    231
    38
    3
    I have the gen3 by Dobeck on my 07 ultra. I never can get an idea fuel milage. What is the setting on your gen 3???
     
  5. DobeckTechSupport

    DobeckTechSupport Active Member Product Contributor

    149
    28
    2
    Adjusting the Green fuel zone will have the largest affect on fuel economy.
    This is the zone you will be in most of the time while at idle, low rpm and light load cruising.

    -TuningHQ
     
  6. rusntx

    rusntx Active Member Contributor

    375
    38
    44
    Though I elected to go another route (even easier install) the Gen 3 was my initial fueler of choice. Talked to them on the phone a couple of times they were very helpful. Glad to see they are back with us on the forum and things are settling down. Best of luck to ya Dobeck.
    [​IMG]