EJK Gen3 cam upgrade possible??

Discussion in 'TFI Questions Answered By Dobeck' started by BuddyK, Oct 17, 2012.

  1. BuddyK

    BuddyK Member

    46
    16
    0
    I have a 2004 FLHTCI ElectraGlide Classic with the 88 cu in stock motor. The only upgrades are an Arlen Ness Big Sucker air filter, Screamin Eagle 3 1/2in Thunder Street Performance slip ons and the EJK GEN3 using the base settings.
    I'm getting ready to replace the cams with either Andrews 21N or 26N cams. I'm still unsure which of the 2 cams I will use, most probably the 26N. I have attached the cam specs for both.
    Will the EJK GEN3 work with this cam swap or will I need to replace with another tuner??
    If it will work, what settings would you recommend??
    Thanks
     

    Attached Files:

  2. DobeckTechSupport

    DobeckTechSupport Active Member Product Contributor

    149
    28
    2
    With either one of those cams we would suggest the following settings:
    3.5 / 4 / 2.5 / 0.5 / 4 / 4.5

    If you have any other questions please let me know.
     
  3. BuddyK

    BuddyK Member

    46
    16
    0
    Thanks for the response!!:D
     
  4. RibEye

    RibEye Junior Member Contributor

    973
    48
    45
    Good to know. I'm getting ready to go with one of those 2 cams myself. I already have the Gen3. It seems to have plenty of tuning room left in it, set for a simple stage-1.

    Enjoy,
    Rich P
     
  5. Iceman24

    Iceman24 Well-Known Member

    3,224
    48
    13
    And...you'll be pleased with the results of your bike's performance. These little tuners are like magic to your bike's motor. I upgraded earlier this season from TFI to GEN3 and can really tell the difference in performance. Enjoy!