Dyno results

Discussion in 'Harley Davidson Extreme Modification' started by mopar, Apr 11, 2009.

  1. mopar

    mopar Member

    40
    16
    0
    Took my bike to the tuner today for dyno. SAE numbers are 103.86 HP, 105.54 Torque. 103" SE Stage IV with 251 cams and V&H Pro Pipe.
     
  2. mopar

    mopar Member

    40
    16
    0
    I told my wife before the dyno, I would be happy with 100 HP or Torque. After hearing all the other opinions of the SE kit, I was prepared for less. The tune picked up 7 HP and 7 ft/lbs. Its over 100 ft/lbs from 3300 to 5100 rpm. That's just right for passing power and Interstate cruising. I'm very happy with it. Dealer had a special on kits during the winter and I got the SE Pro 103 stage 4 for $2300 installed. I substituted SE251 cams in the kit, instesd of the SE260 cams which normally comes in the kit.
     
  3. Sharky1948

    Sharky1948 Junior Member

    640
    28
    2
    Hope mine does well. Have the 255, 103, and breather/pipes. Just waiting for Dynojet to upgrade the dyno software for the fnal pull.
     
  4. ultraglide08

    ultraglide08 Member

    6
    11
    0
    2008 ultra here with true duals and 103" stage 4 kit, 260 cams, dynoed at 111 hp and 109 tq, runs nice now and much cooler.
     
  5. deecon dave

    deecon dave Member

    18
    11
    0
    107cu conv with headquarters heads cams& pistons vh pro pipe dynoed at 110hp 120tq all this in a nightrain goes well