Dobek Gen 3 question

Discussion in 'General Harley Davidson Topic' started by TangSooDoMan, Sep 20, 2015.

  1. TangSooDoMan

    TangSooDoMan Member

    16
    1
    0
    I received my Gen 3 for my 2010 Road King today, was going to install it, but while reading through the installation instructions, step 6 says "Use the supplied O2 blank plugs" Mine didn't come with and O2 blank plugs. Was I supposed to get these plugs? I don't want to install it if I have need these.
     
  2. gusotto

    gusotto Junior Member

    597
    38
    11
    Do the instructions have a list of enclosed parts?

    Maybe check with their web site to verify what you're suppose to get, or just email the company.
     
  3. coopernicus

    coopernicus Junior Member Contributor

    585
    48
    59
    If you look at their site most of the applications have two gen 3s for your model year. One of them is " recommended" . For my bike the recommended one had the bypass and the other one didn't.
     
  4. TangSooDoMan

    TangSooDoMan Member

    16
    1
    0
    I did email the company, haven't gotten a response yet. On their web site it says they have 2 options, 1 with O2 bypass and option 2 with O2 sensors wired into the harness. The one I received doesn't have the bypass or the onew wired into the harness.
     
  5. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,597
    103
    296
  6. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,633
    83
    100
    The "by-pass" version means that the O2 sensors will be by-passed and not used to adjust the ECU. The part you get with this option are just blank plugs that plug into the connectors that the O2 sensor wires would plug into if using those sensors. These are just intended to keep the dust and stuff out of those connectors.

    I left my O2 sensors in the header pipes rather than removing them and plugging the holes.

    If you contact Dillon at Dobeck and tell him you did not get the plug blanks, I am sure he will have some sent to you. Shouldn't stop you from going ahead with your install.

    Cheers,

    TQ
     
  7. TangSooDoMan

    TangSooDoMan Member

    16
    1
    0
    I call them, and they did send it. Thank you.
     
  8. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,633
    83
    100
    BTW - thank you for your service, Sir!!

    Cheers,

    TQ
     
  9. wheelhouse

    wheelhouse New Member

    3
    0
    0
    I have 2010 RK instructions said to unplug 02 sincere