diagnostic codes

Discussion in 'Dyna Models' started by djdomo, Jun 13, 2011.

  1. djdomo

    djdomo New Member

    4
    0
    0
    I have a 07 Lowrider. I fixed the problem and don't know how to clear the old code. every time i start the bike the engine light comes on for a few seconds then goes out informing there is a old code. Any ideas?
     
  2. Jack Klarich

    Jack Klarich Guest

    Harley Davidson Community did you read this first?
     
  3. djdomo

    djdomo New Member

    4
    0
    0
    yes. didn't say how to reset. anymore info would be great
     
  4. Hoople

    Hoople Account Removed

    7,198
    0
    34
    A Copy & paste from http://www.hdtalking.com/archive/index.php/t-2362.html


    To determine if a code is current or historic, clear the displayed code by pushing in and holding the odometer reset button ( longer than 5 seconds) until 'clear' comes up. Release the odometer reset button. Turn OFF the ignition switch.
     
  5. djdomo

    djdomo New Member

    4
    0
    0
    I was able to get the code (p0263). Now i could use help how to fix. Any one had this problem?
     
  6. Jack Klarich

    Jack Klarich Guest

    Check the rear injector wire, wiggle it see if it makes a change, if you can un plug it do that and see if it makes a better connection