Daytona Oil Pumps

Discussion in 'Oil' started by FishHunter, Oct 28, 2015.

  1. FishHunter

    FishHunter Active Member

    134
    26
    1
    These pumps have been out for a while.
    After using 2, in our personal bikes, 117", and a 124" and having used several in clients bikes as trash/debris warranted replacement, we can say that these are very good units at a very good price.
    Thought I'd share this info.:)
     
  2. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,593
    103
    296
    Thanks for sharing, it's always good to hear what's been tried and what works.
     
  3. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
  4. dolt

    dolt Senior Member Contributor

    1,814
    83
    201
    Also available from Drag Specialties.:s

    I would attach the snip from the Drag catalog but when I try to attach it, I am told that I already attached it in another post.:newsmile070: What's up with that.?:cry
     
  5. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    [​IMG]



    Drag Part Number: 0932-0087
     
  6. FishHunter

    FishHunter Active Member

    134
    26
    1
    Yes, Jack, those are the pumps.
    Good 'uns at a very resonable price.
     
  7. Mikvi

    Mikvi Member

    46
    18
    3
    I used one on my twin cam rebuild. Very happy with the performance of the pump.
     
  8. FishHunter

    FishHunter Active Member

    134
    26
    1
    Just installed another, just the other day in a 103" rebuild/repair, that ate a Bob Wood lifter and made a MESS!!.(replaced with S&S)
    Case replacement was required as the lifter bores were(EDIT) .
    .583 S&S cams/CVO 103" Heads/T/body bored to 50mm and ported.
    VERY flat torque curve, striking almost 100 ft/lbs at 2200.

    Please read this...
    [note]
    HDTalking Language Policy - Harley Davidson Community
    [/note]
     
    Last edited by a moderator: Oct 30, 2015