Cylinder Base Cover and Cam Cover Plate

Discussion in 'Touring Models' started by Bud White, Mar 7, 2009.

  1. Bud White

    Bud White Well-Known Member Retired Moderators

    Stock look

    Pretty Simple remove front shifter link bolt remove bolt between cylinders and install this little adapter

    temp install cover to line up bolt hole remove and tighten bolt between cylinders now with little adapter on it

    Make sure to install the rubber bolt head covers .. couldn't get pic of these to turn out

    then install cylinder shield tighten down reinstall Shifter linkage and loctite bolt..


    on the other side i got the matching biohazard plate

    simple enough remove 5 screws from plate on there now


    I applied some hi temp grease to back of plate to help seal it from water getting into the hole and sitting there


    install 5 screws

  2. glider

    glider Veteran Member


    Now you need the chrome inner primary to compliment the cylinder base piece. :bigsmiley20: