So Just finished putting a new set of cams in my 2001 Road king. otherwise the drive train and fuel system is completely stock. I put a set of S&S 551 easy start cams. the bike was running pretty good, but i wanted to do a cam chain tensioner inspection and found that not only where the tensioners bad but one cam was showing sings of lobe wear. so i did a cam change, lifters, higher volume oil pump and of course tensioners. Today I took a ride just around town, no WOT yet. and its running strong and smooth. My question is should I remap it ? I know you should strongly consider it if you increase the air flow by changing air cleaners or exhaust. But cams ?