cam and pushrod question

Discussion in 'Softail Models' started by gobblerljw, May 30, 2011.

  1. gobblerljw

    gobblerljw Member

    20
    11
    0
    I have a 95 FLSTC and was going to put in a ev27 cam and started to tear it down everything I read says it should have solid push rods but I have adjustable ones the module cover was riveted on so I thought it had not been in to can anyone tell me any way to see if the cam has been upgraded without pulling the cam cover any help would be great
    Thanks
     
  2. TripleJ

    TripleJ Senior Member

    1,081
    48
    8
    Pretty sure pulling the cam cover is the only sure way to verify your question. The fact that you have adjustable push rods if you are supposed to have solid ones only tells you that someone, for whatever reason, changed the push rods.
     
  3. gobblerljw

    gobblerljw Member

    20
    11
    0
    well took out the cam and it has an N on the end so has to be a stock cam the bad deal is cam came off with cover so now I gota time it and stick in the new cam Thanks for the help guys