Brake light

Discussion in 'Touring Models' started by 22Raptor, Jul 30, 2012.

  1. 22Raptor

    22Raptor Member

    22
    0
    0
    Have 98 Ultra. Speedo cable snapped off at Speedo drive. And of course, to repair it, the Batwing and front wheel had to come off. I also have all the chrome covers for the disks. So this little endeavor was fun :(. Anyway, got everything back together and working. However, I’m now blowing the brake light fuse. I put a new one in this morning. It was working find and rode 100 miles. At destination I check the lights and again had a blown fuse. Any suggestion as to where to start checking? I’m thinking I may have done something when putting the batwing back on. I hate to have to pull that back off.
     
  2. Fritz

    Fritz Member

    84
    16
    0
    Sounds like you pinched the front brake light wire. You should be able to check it by just taking off the headlight and reaching inside if you're lucky
     
  3. 22Raptor

    22Raptor Member

    22
    0
    0
    thanks, decided to take off the batwing anyway, got a hardwire kit for my tomtom. will check out brake then.