Boom Audio

[baldharleyrider]

Just purchased the handlebar mount Boom Audio Kit. The wiring instructions say that I need to find the B+ connector, and that it has one red wire going to it and it should be under the seat. There is a plug there but it has four wires to it. Bike is a 2003 flhr. Am I just not looking in right spot any help is greatly appreciated. Sorry just re read the instructions and they say the b+(battery positive connector on the main electrical harness undeer the seat ( a red wire with an unused gray connector) say to mate the red power wire connector on the wire harness assembly to the b+ connector. Any help would be great

 

[NEWHD74FAN]

Might want to look at this from the Self Help Electrical section...to identify the acc aux. connector...

http://www.hdtimeline.com/electrical_and_lighting_systems/4483-accessory_connector_plug.html

H-D sells a Y adapter with 4 plugs to allow you to wire in without cutting up to 3 accessories, so you do not have to get the large covered 12V ACC outlet that most touring bikes have already.

 

[Iceman24]

baldharleyrider; It sounds like they want you to connect to the "positive/red" battery connector (b+ = battery+)...you could call Boom Audio & verify. Good luck & enjoy those new tunes. It'll add 200+ miles to your riding adventures...