Bolts for highway pegs

Discussion in 'Dyna Models' started by tomwh, Sep 11, 2011.

  1. tomwh

    tomwh Member

    6
    0
    0
    I have a 95 FXDS Con Lowrider and I have just found out one of the bolts for the Highway peg fiiting on the frame is missing. and i need two new bolts to fit my pegs to the bracket. See the photo. can anyone help. I'm in UK by the way.
    Perhaps someone could tell me what thread and size I need to replace the one on the frame and what I need to get for the other 2
    .:newsmile058::newsmile058:
     
  2. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    3/8 course thread:s
     
  3. tomwh

    tomwh Member

    6
    0
    0
    Here's the photo I missed off.
     
  4. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    No picture, but the standard size in the frame would be 3/8 course thread:s
     
  5. tomwh

    tomwh Member

    6
    0
    0
    For some reason It would not upload the photo. Thanks for the answer anyway.
     
  6. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,276
    133
    156
    With that info from jack here in the uk you are looking for 3/8" unc bolts

    Brian
     
  7. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Thanks Brian, do we have the differences in bolts in the Self help section? I keep forgetting about you all over across the pond:s
     
  8. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,276
    133
    156
    Most stuff here is metric picking up imperial threaded bolts can be a wee bit difficult at times however there are on line specialists that can supply most types of thread you just need to know what you are looking for
    unc stands for unified coarse and unf for unified fine

    Brian
     
  9. Breeze3at

    Breeze3at Well-Known Member

    4,643
    83
    123
  10. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399