billet cam plates?

Discussion in 'Harley Davidson Extreme Modification' started by dynadad, Jun 19, 2009.

  1. dynadad

    dynadad Member

    25
    11
    0
    Hey all

    Just curious anybody have any problems with I beleive 2008 and newer TC
    billet cam plates without bearings in them (come from MoCo that way)?:33:
     
  2. glider

    glider Veteran Member

    25,464
    108
    43
    Lots of cars run the same type of setup without the bearings. I don't foresee a problem if a decent oil is used and maintenance done when it should be done.
     
  3. dynadad

    dynadad Member

    25
    11
    0
    thanks glider, like I said just curious.:bigsmiley23:
     
  4. dolt

    dolt Senior Member

    1,441
    58
    34
    Much quieter than gear drive or the previous Morse chain setup and swapping out cams is a piece of cake; removing the exhaust is the toughest part of the job. I just converted an earlier gear drive setup to the new MoCo "hybrid" hydraulic setup; nice hardware and a great alternative to gear drives.
     
  5. gtnot

    gtnot Member

    30
    18
    1
    There isn't really anything wrong with the stock camplate in 07-up motors. Hydraulic tensioners work really well.
     
  6. Bud White

    Bud White Well-Known Member Retired Moderators

    3,271
    48
    2
    dont think it will be a problem but i still wanna wait and see before i judge .. cars have used a lot of stuff for year like spring loaded tensioners but didnt work for hd