Be aware

Discussion in 'Other Service and Maintenance' started by ahern25, Jun 4, 2011.

  1. ahern25

    ahern25 Active Member

    143
    0
    0
    I have an 09 FLHR with 16 inch apes and a preformence machine clutch cable. I went to adjust it loosened the jam nut and started turning the adjuster screw, so I thought. I guess the adjustment is on the bottom end. The top one is pressed on the the cable and does not turn. Needless to say I was able to adjust the cable but now have to buy a new cable seeing how it is no longer pressed in to the fitting. It still works but Im guessing with time it will need to be replaced. Learning experience is make sure what your turning on is suppose to be turning. I feel like a donky. LOL:newsmile07:
     
  2. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    This may go a long way in helping some one else, sorry to hear of your mistake but this is how we all learn
     
  3. wilks3

    wilks3 Junior Member

    623
    0
    1
    If we don't make mistakes, we aren't doing anything. Good thing you posted, will help out somebody.
    wilks3