Anyone know where to get a single E15 Torx socket

Discussion in 'General Harley Davidson Topic' started by scrinch, Mar 17, 2009.

  1. scrinch

    scrinch Active Member

    248
    26
    0
    The Banjo bolt fitting on my sidecar is a E15 (external) Torx bolt but I can't seem to find a E15 anywhere. My set goes 14 to 16. I am looking for a single socket. Have tried Sears, Amazon, etc. online with no results.
    Anyone got a lead on one??
     
  2. 01dynaglide

    01dynaglide Junior Member

    920
    26
    0
    try going to mcmaster.com and see if they have one.
     
  3. navyman

    navyman Member

    91
    18
    1
    Sears
     
  4. chefron

    chefron Active Member

    127
    26
    0
    Try True Value.
     
  5. HogWyld

    HogWyld Member

    44
    16
    0
    Go to a Sear store
     
  6. garlab1

    garlab1 Member

    95
    16
    0
    try grainger, I needed wave spring clips for my free floating rotors, no one had them except grainger
     
  7. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,570
    68
    61
    Are you sure about that size? Can't find anyone that even offers that size.

    TQ
     
  8. scrinch

    scrinch Active Member

    248
    26
    0
    You are right!! It turned out to be a 16 point 10mm socket fit this. Looked like a torx fitting to me and the 14 was too small ...16 too big. When I finally tried every socket in my tool box that looked like it might fit I found the right one...
     
  9. glider

    glider Veteran Member

    25,464
    108
    43
    That size is about as uncommon as the #T27 in the torx bits. Try a six point socket on it to see if it works.