2014 Limited Cam

Discussion in 'Accessories and Merchandise Collections.' started by sommers201, Mar 2, 2015.

  1. sommers201

    sommers201 New Member

    1
    0
    0
    Has anyone changed out the cam in their 2014 Limited TC engine,
    if so what cam was used and what was the dyno results, I'm trying
    to figure out what to use, I will use a Stage I air cleaner and change out the
    mufflers but don't want to do any other motor work.
     
  2. 67wizard

    67wizard Junior Member

    495
    28
    1
    I can't see changing the cams. Mine runs just fine stage one ac, reinhart slipons V&H FP3. Of course Im an old guy.
     
  3. dbmg

    dbmg Experienced Member

    5,800
    153
    318
    If the interest to do motor work is nil, then leave well enough alone. Have you priced a upgraded cam replacement?
     
  4. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,593
    103
    296
    What results are you looking for? If your only doing minor mods like exhaust and Stage 1 air cleaner you may want to consider adding more fuel as you'll be leaning it out with those changes.

    Take a look in the self help section and see what others are using as a fuel management system.
     
  5. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
  6. Tn.Heritage

    Tn.Heritage Member

    34
    16
    0
    The answer is yes, look in the dyno section and you will see mine posted but I'll post it here also. I had Andrews 57 cams installed, GMR lifters, SE tapered push rods, Fuel-Moto 2-1-2 Jackpot Ceramic coated head pipe with RC Components 4" mufflers and had a agitator SE breather on at the time but swapped it out for the Cobra breather due to the throttle body noise I was getting with the SE open breather. Anyway the bike runs awesome tuned with a Power Vision tuner, I bought the license from my tuners for a fraction of the cost to buy the tuner outright. Here is my sheet and like I said it runs awesome !!