2011 Road King Help - Boom Audio

Discussion in 'Communications And Radio' started by hd fat king, May 7, 2011.

  1. hd fat king

    hd fat king Member

    8
    0
    0
    I have a 2011 Road King and an trying to install BOOM audio. Have all connectors on except the orange/white wire which is supposed to be spliced in-line with wire of same color from main electrical connector 7A, only problem is, which one is main electrical connector 7A?? Any and all help greatly appreciated!! Thanks.
     
  2. chopp47

    chopp47 New Member

    1
    0
    0
    Re: 2011 Road King Help

    That is the connector that is fastened to the rear fender right by the ecm.
    Dennis
     
  3. hd fat king

    hd fat king Member

    8
    0
    0
    Re: 2011 Road King Help

    Thanks chop 44. Is it the one that is on the right side also called Delphi connector? Thanks!
     
  4. hd fat king

    hd fat king Member

    8
    0
    0
    Re: 2011 Road King Help

    Never mind, I found it! If it was any more out in the open it would have bit me! Thanks again for the help!