2010 Dyna Starter problem

Discussion in 'Electrical' started by joshjank81, Aug 18, 2010.

  1. joshjank81

    joshjank81 New Member

    4
    1
    0
    I have an issue with my 2010 Super Glide Custom. I turn the ignition on, turn the kill switch on and let the put cycle, when i go hit the starter switch it clicks a few times and the bike loses all power. The bike has about 3500 miles on it, and battary is good, the conections where tight and clean, and the fuses were good. Does any one have any idea what else the problem could be?
     
  2. R. Lewis

    R. Lewis Senior Member Retired Moderators

    2,183
    48
    5
    Does she power back up after it sits a bit, Have you checked under your switches fro corrosion,what is the volts , amps and ohms reading?
     
  3. joshjank81

    joshjank81 New Member

    4
    1
    0
    I powered up once and after that nothing.
     
  4. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    take it in and make them fix it warranty issue here
     
  5. joshjank81

    joshjank81 New Member

    4
    1
    0
    Thanks for the help.