2000 Road King Headlight Problem

Discussion in 'Electrical' started by switzj, Jun 29, 2010.

  1. switzj

    switzj New Member

    2
    0
    0
    Noticed high beam light was on, then looked and seen bulb was out. Still had spot lights that lit up. Replaced bulb in headlight. Before screwing everything back into place hooked up headlight to connecter, turned on ignition and now I have no head light and no spots. I noticed the electrical plug that fits into the headlight is melted a little on one prong. Could be bad plug, however, why are my spots not working now?
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    The spots only work on the low beam of the headlight, you may be switched to the high beam and that's why?

    As far as the connector, the melting usually is the result of a poor connection to the bulb (ie Loose).
     
  3. switzj

    switzj New Member

    2
    0
    0
    I tried lights on low beam and still no spot lights or headlight. where are the fuses located?
     
  4. glider

    glider Veteran Member

    25,464
    108
    44
    No manual yet? :D

    Try under the left side cover.