2000 Road King Classic

[Irish Hog]

Hello.
I have just bought a 2000 RoadKing and I am curious if a TFI will be compatible with my bike?? I am going to be installing Reinhart slipon's and need jetting? Thanks

 

[glider]

Sure would be compatible as long as you get the one for your bike.

EFI - Electronic Fuel Injection Controllers - ATVs, UTVs, Motorcycles, Snowmobiles, Scooters, Sport Bikes, Watercraft

 

[Irish Hog]

Sure would be compatible as long as you get the one for your bike.

EFI - Electronic Fuel Injection Controllers - ATVs, UTVs, Motorcycles, Snowmobiles, Scooters, Sport Bikes, Watercraft

I have been looking at a few controllers and they all seem to only go back to 01? What is so different about the 2000 Road King EFI from the new EFI's??

 

[glider]

Morelli Injection instead of Delphi injection. Call them to verify fitment or post in the Dobeck forum.

Harley Touring 1995-2005 FI-1040ST Instructions View/Buy

 

[fisherman124]

i also have 2000 rk doe beck has one for your bike ive talked to them. there is a post under the doebeck section on this site there now about the units that will fit you the thread posted by me very helpful for me check it out . u also get a dicount with this site through them good luck

 

[DobeckTechSupport]

Irish Hog,

Glider is correct that you will need a FI-1040ST for your 2000 RoadKing.

The FI-1040ST works for Big Twin Harley's from 1995-2005. Our EFI controller works for both types of ECU injection systems. It was not until 2006 that we started to have to spread out our part numbers for different models. This was due to the fact of Harley starting to implement O2 sensors and also they decided to change injector connectors for different models and years.