Original problem was while riding my starter started engaging every now and then, made it home just in time for the starter to remain engaged then bike died. Took of left side cover found burnt wire going to the ignition switch. Repaired the wire inspected the other wires and found no other problems. Tried to start the bike up but no power to the dash or anywhere past the fuse/circuit block while all of the circuits breakers are installed. I removed the breakers to the orange and orange and white wires and I can get 12 volts past the other 2 breakers, put either of the other 2 breakers in and voltage goes to 0 on all 4 circuits. Unplugged everything inside of the headlight housing, rear tail light and still same problem. Any ideas?