06 softtail standard starts /wont accl.

Discussion in 'General Harley Davidson Topic' started by tucker1967, Dec 31, 2013.

  1. tucker1967

    tucker1967 New Member

    4
    0
    0
    this bike has always been super depend.went to ride wont go .codes/b1004 always been there.u1016/u1064/u1300. all serial data prob. dont understand.
     
  2. bc45

    bc45 Active Member

    211
    0
    1
    Serial data codes mean that particular module is not communicating with the PCM for some reason.

    Is you Bike carbureted?
    Does the fuel gauge or low fuel light work?
     
  3. dbmg

    dbmg Experienced Member

    5,800
    153
    318
    Have you started at the battery cables on both ends for clean and secure connections???
     
  4. tucker1967

    tucker1967 New Member

    4
    0
    0
    sorry took so long to reply.holidays!the bike is efi and the fuel gauge never worked but the low fuel light does work.
     
  5. tucker1967

    tucker1967 New Member

    4
    0
    0
    checked batt. terms at both ends and replaced batt. every thing is tight and clean.
     
  6. Davidw2415

    Davidw2415 Senior Member

    1,456
    46
    0
    If my bike would start but not accelerate I think my first thought would be to check the throttle cables to make sure there wasn't a break or that they have not come undone at the throttle plate.
     
  7. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    [​IMG] Fuel injected? If it looks like this behind your air filter check for ease of movement where the cables attatch and look for bent or broken pieces, try to grab and snap the throttle where the cables hook up, does the engine RPM go up and down easy?
     
  8. tucker1967

    tucker1967 New Member

    4
    0
    0
    2006 softtail stan. it will start but when you throttle it itpops and dies. pulled codes /b1004/u1016/u1064/u1300. serial data codes. dont get it.the low fuel light works but the gauge never has.it is efi .all of the batt. term. tight.
     
  9. bc45

    bc45 Active Member

    211
    0
    1
    First like Jack asked is it fuel injected? or Carburetor?
    did you clear codes and do they come back?
    How many miles on bike?
    any modifications on bike?
     
  10. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,456
    133
    196
    The OP stated in post #4 & #8 that the bike is efi. I don't want to insult but have you checked the fuel level? Does the pump run and stop when you turn the ignition on?