02 softail TSSM power draw

Discussion in 'Electrical' started by Iggy2661, May 9, 2009.

  1. Iggy2661

    Iggy2661 New Member

    2
    11
    0
    Does anyone know how much of an Amp draw a Turn Signal/Security Module (TSSM) is normal.
     
  2. rancid

    rancid Active Member

    257
    28
    1
    it varies, depending on what stage the tssm is in, its about 30mA for 30seconds after arming then it drops down to bout 2 or 3mA i think, total draw is about 5 to 7mA
    anyone with a service manual can confirm mA draw on all components in the system.
     
  3. Iggy2661

    Iggy2661 New Member

    2
    11
    0
    Thanks, this one is pulling almost a full amp all the time.
     
  4. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,631
    68
    99
    Hmmm. Think you have another problem. Check this out:

    Testing The Charging System - Harley Davidson Community

    If that is all good (especially the regulator bleed back test), then you have something else drawing current. Any add-on to the bike that are electrical/electronic?

    TQ