Easy pull clutch

67hat34c · Aug 31st, 2009, 01:54 PM

Installed an aftermarket eazy clutch adaptor on an 04 soft tail. Believe he found it on this web site. Anyhow only thing that makes me a little uneasy is the fact that it extends the arm on the ramp and therefore you must shorten the cable by installing a bushing. Now about a quarter inch of cable can screw into the transmission cover and you have to install a bushing. Before there was about an inch of thread into the casting. Besides this the clutch handle definitely feels better and you do not have to replace the clutch spring.

Has anyone installed one of these and are there any issues?

glider · Aug 31st, 2009, 02:01 PM

Used the Burly EZ clutch similar to what you have. No problems except the clutch adjustment is a bit more sensitive when you do it.

No problem with the cable end in the cover unless you happen to stand on it.

softailhog · Aug 31st, 2009, 02:52 PM

Quote:

Originally Posted by glider

Used the Burly EZ clutch similar to what you have. No problems except the clutch adjustment is a bit more sensitive when you do it.

Glider, just ordered the Burly unit for my bike. Since the adjustment is more sensitive, should I use the "easy" clutch adjustment method or the "by the book" method to get the best adjustment?

Anything else to look out for? Thanks!

glider · Aug 31st, 2009, 05:07 PM

Either or will do. The easy method will give you the feel as you do it. Make sure to do the adjustment COLD.

Aug 31st, 2009, 01:54 PM	#1
67hat34c Warming The Wheels Ride: 2008 Sportster 1200c Join Date: Mar 25th, 2008 Posts: 138	Easy pull clutch Installed an aftermarket eazy clutch adaptor on an 04 soft tail. Believe he found it on this web site. Anyhow only thing that makes me a little uneasy is the fact that it extends the arm on the ramp and therefore you must shorten the cable by installing a bushing. Now about a quarter inch of cable can screw into the transmission cover and you have to install a bushing. Before there was about an inch of thread into the casting. Besides this the clutch handle definitely feels better and you do not have to replace the clutch spring. Has anyone installed one of these and are there any issues?

Aug 31st, 2009, 02:01 PM	#2
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 21,072 My Mood:	Re: Easy pull clutch Used the Burly EZ clutch similar to what you have. No problems except the clutch adjustment is a bit more sensitive when you do it. No problem with the cable end in the cover unless you happen to stand on it. __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Aug 31st, 2009, 05:07 PM	#4
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 21,072 My Mood:	Re: Easy pull clutch Either or will do. The easy method will give you the feel as you do it. Make sure to do the adjustment COLD. __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Easy pull clutch

Softail Models