Engine Tuners You Would or Wouldn't Recommend

dhog

I had Blue Ridge HD in Hickory N.C.do my PCIII and V&H 2 into1 pro pipe. they did a before and after dyno. The stock run was 63.89hp at 66.89 torque. I told them that I wanted low end and mid range pick-up.Eric the service guy and one of the guys that does the dyno were very helpful we talked about tru-duals vs 2 into 1, and also what Iwanted to do in the future, i.e. cams heads clutches.I went on his advise with the 2 into 1. I'm very happy with the work that they have done for me and now the hp is 68.36 and torque is 71.45. I've noticed a little less gas mileage but the extra torque here in western N.C. is very nice. I would recommend this shop highly.

dcfatboy

I did not loose any bottom end torque going to the Bassani Power Curve.

dcfatboy

I recommend Will Gilbert of Devil Dawg Custom Cycle, Chantilly, VA and John Meade, ProStreet Cycle, Richmond, VA.

82.44 HP, 97.59 TQ (5th gear)
AMS 96" BB, Heads and Lifters
Cometic 0.040 head gasket
Andrews 26G cams
Bassani Tru-Duals
Rush Slash Down mufflers (2.0" baffles)
Arlen Ness Big Sucker
PCIII USB

Animal

Universal Cycles in Calgary, Alberta.
Vance and Hines Oval Slip On's, K & N air filter and Dynajet Power Commander. Set up on the dyno for all around performance boost. The difference from stock is like night and day. I'm loving it!

__________________
Northern Rider says Ride Hard or Stay Home

up@12

Speeds performance plus

Speed's Performance Plus - Horsepower By The $$$

These guys rock

Doc 1

Dave @ JD Cycle Works in Bethlehem Pa,
Brian Beckley @ Zepka Harley Davidson Johnstown Pa.
Joe and Tom @ HorsePower Harley Davidson in North East Pa.
Brandon @ IndyWest Harley Davidson in Indianapolis In.
Tim @ McDaniels Harley Davidson South Bend In.
John and the boy's @ Kokomo Harley Davidson in In.
Jack @ American Harley Davidson in Ann Arbor Mi.
Noah @ Grand Rapids Harley Davidson in Mi.
Eddie Andry @ Greenville Harley Davidson in Greenville SC
Mike @ Battlefield Harley Davidson in Gettysburgh Pa.
Mike @ Gator Harley Davidson in Leesburgh Fl.
Josh @ F&S Harley Davidson in Dayton Oh.


All of these guys do a complete tune with SERT and most of them with a PCIII also. You will not be dissapointed with any of the listed shops.

__________________
HDMD Tuning Center
EFI TRAINING
352.242.9616

glider

great info doc, keep it coming

__________________
Psssst!
Please stop by the "self help section" for maintenance tips, diagnostic codes and much more.
click me!>>Self Help Information and Tips<< click me!

Papamte

I've only had experience with one tuner in my area. This was Rod at Rod's Performance in Hanceville, AL. He did a good job on the initial tune back a couple of years ago, but the next year I changed my pipes and mufflers and he installed them for me. He was supposed to do a re-tune after the install, but I know that he didn't. I've checked the map with my laptop and verified that there was no update to the map. I went to his shop and we pulled the map up on his computer, and the map date was still the same as the original. Still he insisted that he re-tuned it and tweaked the map. I have lost my confidence in him!

rosankyharleyman

How about in the central Texas area?????

lonerider

Doc, Have you heard anything good or bad about North American Warhorse in Dunmore PA?