Nightrider's XiED'S

SteveB · 06-15-2008, 05:23 PM

Getting ready to install Nightrider's XiED's on my '07 EGC . Has anyone used this product and how satisfied with its performance are you? Looks to be a fairly simple install 15 mins. or less. Raining here today on and off plus daughter and son came over for father's day and won't be able to ride today....but there's always tomorrow....and the next day.......

smitty901 · 06-15-2008, 05:36 PM

Be real carefull not to bend wire to much and damage them. I have been told by a few that the wire can be a little touchy on the o2 sensor
I have talked with Steve at night ride and ordered a set for my 07 also.
Sounds like a good idea that should work time will tell we have seena lot of good ideas fall flat.
Good luck with it and lets us know how they go I will not have a chnace to play with mine till next weekend

SteveB · 06-15-2008, 05:54 PM

That is what I read....I will be careful with the install...Thanks

Bud White · 06-15-2008, 06:23 PM

Let us know how the install goes i was looking at the front o2 and that one lookes like it will be the hard one as it snakes around in like a u connector right near edge of frame tubes

DYNAGUY · 06-16-2008, 02:01 AM

Quote:

Originally Posted by SteveB

Getting ready to install Nightrider's XiED's on my '07 EGC . Has anyone used this product and how satisfied with its performance are you? Looks to be a fairly simple install 15 mins. or less. Raining here today on and off plus daughter and son came over for father's day and won't be able to ride today....but there's always tomorrow....and the next day.......

When you install the one on the front. Put a loop in factory wire, then the IED will fit perfect. Put a wire tie on wire and frame rail . You done. BTW you will be well pleased will this add-on.

SteveB · 06-20-2008, 01:43 PM

The install time was about 15 minutes majority of time spent on routing wire so they would remain fairly straight and not kinked. Simple install, guess I'll see how they perform this weekend barring any rain....

eleft36 · 09-16-2008, 10:14 AM

Quote:

Originally Posted by SteveB

The install time was about 15 minutes majority of time spent on routing wire so they would remain fairly straight and not kinked. Simple install, guess I'll see how they perform this weekend barring any rain....

Wow, it must rain in your area for long intervals.
Today 9/16/08 and still no known results??.

Al

PS .....Maybe you didn't get back yet.

Dr. Doolittle · 09-16-2008, 02:59 PM

Quote:

Originally Posted by eleft36

Wow, it must rain in your area for long intervals.
Today 9/16/08 and still no known results??.

Al

PS .....Maybe you didn't get back yet.

This happens a lot here. We all have good intentions and then get busy or forget to follow up. I've probably been guilty of it several times.

If you're really curious, send them a Private Message with any questions you have.

smitty901 · 09-16-2008, 11:37 PM

Quote:

Originally Posted by eleft36

Wow, it must rain in your area for long intervals.
Today 9/16/08 and still no known results??.

Al

PS .....Maybe you didn't get back yet.

i think we got off on another thread about the XIEDS
Heres was my final word on them
Xied's for my bagger - Harley Davidson Community

06-15-2008, 05:23 PM	#1 (permalink)
SteveB Warming The Wheels Ride: '07 Electra Glide Classic Join Date: 2007, Sep 09 Location: Down the road past the church on the right; NC Posts: 82 My Mood:	Nightrider's XiED'S Getting ready to install Nightrider's XiED's on my '07 EGC . Has anyone used this product and how satisfied with its performance are you? Looks to be a fairly simple install 15 mins. or less. Raining here today on and off plus daughter and son came over for father's day and won't be able to ride today....but there's always tomorrow....and the next day.......

06-15-2008, 05:36 PM	#2 (permalink)
smitty901 Community Guru Wannabe Ride: 2007 Road glide Join Date: 2008, Jan 02 Location: Wisconsin Posts: 1,742 My Mood:	Re: Nightrider's XiED'S Be real carefull not to bend wire to much and damage them. I have been told by a few that the wire can be a little touchy on the o2 sensor I have talked with Steve at night ride and ordered a set for my 07 also. Sounds like a good idea that should work time will tell we have seena lot of good ideas fall flat. Good luck with it and lets us know how they go I will not have a chnace to play with mine till next weekend __________________ The Infantry leads the way

06-15-2008, 05:54 PM	#3 (permalink)
SteveB Warming The Wheels Ride: '07 Electra Glide Classic Join Date: 2007, Sep 09 Location: Down the road past the church on the right; NC Posts: 82 My Mood:	Re: Nightrider's XiED'S That is what I read....I will be careful with the install...Thanks

06-15-2008, 06:23 PM	#4 (permalink)
Bud White Contributor$ Ride: 2008 Road King Classic. Join Date: 2008, Jun 09 Location: Wayne , MI Posts: 466 My Mood:	Re: Nightrider's XiED'S Let us know how the install goes i was looking at the front o2 and that one lookes like it will be the hard one as it snakes around in like a u connector right near edge of frame tubes __________________ "Tell me where I'm going, let my bones fall in the Dust, can't you hear that Ghost thats Calling as my Colt begins to Rust, in the Dust"

06-20-2008, 01:43 PM	#6 (permalink)
SteveB Warming The Wheels Ride: '07 Electra Glide Classic Join Date: 2007, Sep 09 Location: Down the road past the church on the right; NC Posts: 82 My Mood:	Re: Nightrider's XiED'S The install time was about 15 minutes majority of time spent on routing wire so they would remain fairly straight and not kinked. Simple install, guess I'll see how they perform this weekend barring any rain....

Digg this Post to del.icio.us Newsvine Yahoo Bookmarks Technorati Google Bookmarks Facebook StumbleUpon Live Bookmarks What is this?
	Thread Tools	Display Modes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Nightrider's XiED'S

Electrical