Security Light Coming on

glider · Feb 18th, 2008, 04:54 PM

Depends on the code you pull out if you can deal with it yourself.

Araba Shriner · Feb 18th, 2008, 05:01 PM

If I'm not mistaken the code is in RED

P - None Pn32915-05
S - 61122 End Pn68922-OOC
SP - None Pn67349-04
T - None Pn67348-04A

glider · Feb 18th, 2008, 05:20 PM

Sorry for the edit, hit the wrong button.

If you are sure that you are doing the procedure correctly, it could be a part number being it doesn't correspond to any code numbers..

Araba Shriner · Feb 18th, 2008, 05:27 PM

Same code both times. But I will re-read and give it another try.

Araba Shriner · Feb 19th, 2008, 11:35 PM

Hello glider. I re-read the instructions and performed the dtc procedure again. I am getting the same results. The 61122 code is not listed... but my right turn signal will flash normally 3 times, then start flashing very rapidly. The left signal flashes normally all the time.

Riding home tonight, I noticed the alarm light had gone out, but just as soon as I hit the right turn signal, it flashed normally 3 times, then began the rapid flashing again. Just as soon as the rapid flash began again, the security light came back on at the particular moment.

Is this making any sense?

glider · Feb 20th, 2008, 03:36 AM

With the rapid fleshing signal, give this a try and see if it changes anything. It was a problem in older bikes but could also be your problem here too as long as you make sure that both front and rear bulbs in both the signals are all working properly (lighting)

TSM/TSSM Rapid Flashing Signals - Harley Davidson Community

Araba Shriner · Feb 20th, 2008, 09:41 AM

My bike is an '05 UC. The previous owner had Pancea lights installed front and back. Both front and back bulbs are operating.

I did the calibration routine suggested. Did the left turn signal first, then the right. As soon as I hit the right turn button, the security light came back on after the first 3 flashes. The rapid flashing began as soon as the security light came on.

I am unfamiliar with the Pancea system. I will do some more research on them and see if I can find anything there.

Araba Shriner · Feb 20th, 2008, 07:30 PM

glider, first off i would like to say thanks a ton for all your help and insite.

I spent a lot of time today with a guy named Richard from Kurakyn, emailing back and forth. He thinks my problem is with the load management system for the Panacea lights and says that is what's causing the bike to throw a code. I will follow his suggestions and replace the load eq. and let you know if my problems disappear like he suggests.

Thanks for all your help

glider · Feb 20th, 2008, 08:11 PM

Glad to be of any help. It makes sense about the load EQ but there is no way to test it other than replacing it being it acts up after the third blink.

Good luck with the new part.

Araba Shriner · Mar 4th, 2008, 12:37 PM

hey glider... I made another call to order the load eq and find the parts are going to be $70 + S/H.

I asked if it would hurt the bike if I decided not to replace it and was told NO it wouldn't, but only helps regulate the blinking speed and keeps from triggering the security light when I hit the turn signals.

This is something I can live with until I get ready to sell the bike. I am not going to replace the part until then.

Feb 18th, 2008, 04:54 PM	#11 (permalink)
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 11,627 My Mood:	Re: Security Light Coming on Depends on the code you pull out if you can deal with it yourself. __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Feb 18th, 2008, 05:01 PM	#12 (permalink)
Araba Shriner Start The Engine Ride: 2005 H-D FLHTCUI Join Date: Feb 17th, 2008 Posts: 16	Re: Security Light Coming on If I'm not mistaken the code is in RED P - None Pn32915-05 S - 61122 End Pn68922-OOC SP - None Pn67349-04 T - None Pn67348-04A Last edited by glider : Feb 18th, 2008 at 05:20 PM.

Feb 18th, 2008, 05:20 PM	#13 (permalink)
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 11,627 My Mood:	Re: Security Light Coming on Sorry for the edit, hit the wrong button. If you are sure that you are doing the procedure correctly, it could be a part number being it doesn't correspond to any code numbers.. __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Feb 18th, 2008, 05:27 PM	#14 (permalink)
Araba Shriner Start The Engine Ride: 2005 H-D FLHTCUI Join Date: Feb 17th, 2008 Posts: 16	Re: Security Light Coming on Same code both times. But I will re-read and give it another try.

Feb 19th, 2008, 11:35 PM	#15 (permalink)
Araba Shriner Start The Engine Ride: 2005 H-D FLHTCUI Join Date: Feb 17th, 2008 Posts: 16	Re: Security Light Coming on Hello glider. I re-read the instructions and performed the dtc procedure again. I am getting the same results. The 61122 code is not listed... but my right turn signal will flash normally 3 times, then start flashing very rapidly. The left signal flashes normally all the time. Riding home tonight, I noticed the alarm light had gone out, but just as soon as I hit the right turn signal, it flashed normally 3 times, then began the rapid flashing again. Just as soon as the rapid flash began again, the security light came back on at the particular moment. Is this making any sense?

Digg this Post to del.icio.us Newsvine Yahoo Bookmarks Technorati Google Bookmarks Facebook StumbleUpon Live Bookmarks What is this?
	Thread Tools	Display Modes

Feb 20th, 2008, 03:36 AM	#16 (permalink)
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 11,627 My Mood:	Re: Security Light Coming on With the rapid fleshing signal, give this a try and see if it changes anything. It was a problem in older bikes but could also be your problem here too as long as you make sure that both front and rear bulbs in both the signals are all working properly (lighting) TSM/TSSM Rapid Flashing Signals - Harley Davidson Community __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Feb 20th, 2008, 09:41 AM	#17 (permalink)
Araba Shriner Start The Engine Ride: 2005 H-D FLHTCUI Join Date: Feb 17th, 2008 Posts: 16	Re: Security Light Coming on My bike is an '05 UC. The previous owner had Pancea lights installed front and back. Both front and back bulbs are operating. I did the calibration routine suggested. Did the left turn signal first, then the right. As soon as I hit the right turn button, the security light came back on after the first 3 flashes. The rapid flashing began as soon as the security light came on. I am unfamiliar with the Pancea system. I will do some more research on them and see if I can find anything there. Last edited by Araba Shriner : Feb 20th, 2008 at 08:38 PM.

Feb 20th, 2008, 07:30 PM	#18 (permalink)
Araba Shriner Start The Engine Ride: 2005 H-D FLHTCUI Join Date: Feb 17th, 2008 Posts: 16	Re: Security Light Coming on glider, first off i would like to say thanks a ton for all your help and insite. I spent a lot of time today with a guy named Richard from Kurakyn, emailing back and forth. He thinks my problem is with the load management system for the Panacea lights and says that is what's causing the bike to throw a code. I will follow his suggestions and replace the load eq. and let you know if my problems disappear like he suggests. Thanks for all your help Last edited by Araba Shriner : Feb 20th, 2008 at 08:39 PM.

Feb 20th, 2008, 08:11 PM	#19 (permalink)
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 11,627 My Mood:	Re: Security Light Coming on Glad to be of any help. It makes sense about the load EQ but there is no way to test it other than replacing it being it acts up after the third blink. Good luck with the new part. __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Mar 4th, 2008, 12:37 PM	#20 (permalink)
Araba Shriner Start The Engine Ride: 2005 H-D FLHTCUI Join Date: Feb 17th, 2008 Posts: 16	Re: Security Light Coming on hey glider... I made another call to order the load eq and find the parts are going to be $70 + S/H. I asked if it would hurt the bike if I decided not to replace it and was told NO it wouldn't, but only helps regulate the blinking speed and keeps from triggering the security light when I hit the turn signals. This is something I can live with until I get ready to sell the bike. I am not going to replace the part until then.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Security Light Coming on

Electrical