09 Dyna SB tail light hookup

Hobbit · Oct 7th, 2009, 06:37 AM

Quote:

Originally Posted by 66cruiser

But not, it seems for installing an 09 light on an 06 bike! Do you by any chance have the 09 parts book? & if so could you give me the part nr. for the plug that goes into the tail light socket? Also from the service manual tell me the color codes for the wires that go to pins j1, j2 & j3 in the tail light? Thanks for any assistance you can give me.. Looks like I get to do a bit of cutting & splicing after all.

Table 7-8.Tail Lamp Wires: FXDB Only
FUNCTION NO. TYPE WIRE COLOR CAVITY
Tail lamp [93] 4-pin Deutsch Not used 1
R/Y 2
O/W 3
BK 4

66cruiser · Oct 7th, 2009, 10:02 AM

Quote:

Originally Posted by Hobbit

Table 7-8.Tail Lamp Wires: FXDB Only
FUNCTION NO. TYPE WIRE COLOR CAVITY
Tail lamp [93] 4-pin Deutsch Not used 1
R/Y 2
O/W 3
BK 4

Perfect! Now all I need is the part number for the connector plus the socket pins if they're not included.. will start my voyage into parts guys' Bermuda Triangle this AM. Don't think I'll need the schematic for the '09 after all.

66cruiser · Oct 7th, 2009, 10:06 AM

Quote:

Originally Posted by NEWHD74FAN

I know this is probably a silly question, but do you have a wiring diagram...to identify the wiring or color codes? It looks like the socket' pins are labeled or numbered (a good thing) even though they obviously are not compatible with that plug-in connector. Does it look like there is some vendor noame embossed on the connector or mate i.e. Molex, AMP, 3M etc.?

I do have all the manuals for my '06 & thanks to hobbit it looks as if the color codes are the same for the 09. He also has identified the connector as a 4 pin deutsch which I should be able to match. What a great site!

66cruiser · Nov 7th, 2009, 09:01 PM

All done (finally) with thanks to all..

NEWHD74FAN · Nov 7th, 2009, 11:43 PM

Looks good, and I am sure it looks as good underneath. I like the Deutsch connectors because the terminations mate and seal well, unlike so many of the other connector types used on our bikes.

Nov 7th, 2009, 09:01 PM	#24
66cruiser Play The Throttle Ride: 2006 Street Bob FXDBI Join Date: May 26th, 2008 Location: SW Oregon Posts: 210	Re: 09 Dyna SB tail light hookup All done (finally) with thanks to all.. __________________ '06 FXDBI not quite stock

Nov 7th, 2009, 11:43 PM	#25
NEWHD74FAN Moderators Ride: 2004 Sportster XL1200RS Join Date: Aug 24th, 2008 Location: Camarillo, CA Posts: 4,907 My Mood:	Re: 09 Dyna SB tail light hookup Looks good, and I am sure it looks as good underneath. I like the Deutsch connectors because the terminations mate and seal well, unlike so many of the other connector types used on our bikes. __________________ Please stop by the "Self Help section" for maintenance tips, diagnostic codes and much more. >>Self Help Information and Tips<<

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09 Dyna SB tail light hookup

Electrical