2007 dyna wide glide

rob180 · Oct 25th, 2009, 06:44 PM

Bike wont start ,washed it 3 weeks ago and dried it off with a blower now went to start it and it turns over but wont fire up doesnt even sound like it getting fuel any ideas?

glider · Oct 25th, 2009, 06:48 PM

Pull the plugs and see if they are wet with fuel and if you are getting spark.

jmpancoast · Oct 25th, 2009, 07:35 PM

Quote:

Originally Posted by rob180

Bike wont start ,washed it 3 weeks ago and dried it off with a blower now went to start it and it turns over but wont fire up doesnt even sound like it getting fuel any ideas?

A common issue after getting wet, such as washing or riding in heavy rain, is water getting in the plug to the ECM. Disconnect and see if water has found its way in there. If so, applying dielectric grease will help protect from future repeats.

rob180 · Oct 25th, 2009, 07:42 PM

I havnt pulled the plugs yet but i put a screw driver on the plug wire and close to the plug and cranked it over and didnt see any spark

glider · Oct 25th, 2009, 07:47 PM

Go check it out and report back to us.

rob180 · Oct 26th, 2009, 10:30 PM

ok i checked the spark and theres none, and allso cranked the engine over and then pulled a plug and it was dry

wildspirit97 · Oct 26th, 2009, 10:32 PM

Have you tried unplugging the ECM harness, and blowing it out with air and reconnecting? Also, check and see if you have any trouble codes

R. Lewis · Oct 26th, 2009, 10:35 PM

check for a blown fuse?

rob180 · Oct 26th, 2009, 11:18 PM

i checked the fuses all ok
i pulled the ecm plug and didnt see any moisture
i dont know where the codes show up but did look at the insterment speedo and didnt see anything out of the normal

jdatbs · Oct 28th, 2009, 09:12 PM

When you turn the ignition switch on, can you hear the FI pump?

Sorry, that last question was out of sequence. I will give you a list of things that have caused my bike not to start.
1. No gas in the tank.
2. Kill switch on off.
3. Forgot the passive alarm unit. It has to be close enough for the bike to read it. Yes, I've done this.
4. rode it in the rain and ruined the ignition coil. But that doesn't account for no fuel.
5. Water gets into the left side switch housing ('07 and later models have a killer in there to prevent starting in gear w/o the clutch disengaged)
6. Can you hear the FI pump when you turn on the ignition switch?

JD

Do you own/know how to use a multimeter?

Oct 25th, 2009, 06:44 PM	#1
rob180 New Family Ride: 2007 dyna wide glyde Join Date: Oct 25th, 2009 Posts: 6	2007 dyna wide glide Bike wont start ,washed it 3 weeks ago and dried it off with a blower now went to start it and it turns over but wont fire up doesnt even sound like it getting fuel any ideas?

Oct 25th, 2009, 06:48 PM	#2
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 21,068 My Mood:	Re: 2007 dyna wide glide Pull the plugs and see if they are wet with fuel and if you are getting spark. __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Oct 25th, 2009, 07:42 PM	#4
rob180 New Family Ride: 2007 dyna wide glyde Join Date: Oct 25th, 2009 Posts: 6	Re: 2007 dyna wide glide I havnt pulled the plugs yet but i put a screw driver on the plug wire and close to the plug and cranked it over and didnt see any spark

Oct 25th, 2009, 07:47 PM	#5
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 21,068 My Mood:	Re: 2007 dyna wide glide Go check it out and report back to us. __________________ Psssst! Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. click me!>>Self Help Information and Tips<< click me!

Oct 26th, 2009, 10:30 PM	#6
rob180 New Family Ride: 2007 dyna wide glyde Join Date: Oct 25th, 2009 Posts: 6	Re: 2007 dyna wide glide ok i checked the spark and theres none, and allso cranked the engine over and then pulled a plug and it was dry

Oct 26th, 2009, 10:32 PM	#7
wildspirit97 Contributor$ Ride: 2007 softail fxst Join Date: Sep 12th, 2007 Location: Washington Posts: 1,113 My Mood:	Re: 2007 dyna wide glide Have you tried unplugging the ECM harness, and blowing it out with air and reconnecting? Also, check and see if you have any trouble codes __________________ 2007 FXST - Big Sucker - V&H Big Radius - T-Max with Auto Tune.

Oct 26th, 2009, 10:35 PM	#8
R. Lewis Moderators Ride: 07 EG UC Black Pearl Join Date: Nov 3rd, 2007 Location: Bourbon, Missouri Posts: 1,705 My Mood:	Re: 2007 dyna wide glide check for a blown fuse? __________________ Out in the middle of nowhere - but still close enough to somewhere!

Oct 26th, 2009, 11:18 PM	#9
rob180 New Family Ride: 2007 dyna wide glyde Join Date: Oct 25th, 2009 Posts: 6	Re: 2007 dyna wide glide i checked the fuses all ok i pulled the ecm plug and didnt see any moisture i dont know where the codes show up but did look at the insterment speedo and didnt see anything out of the normal

Oct 28th, 2009, 09:12 PM	#10
jdatbs Start The Engine Ride: 2007 FXDC Join Date: Oct 27th, 2009 Location: Riverside, CA Posts: 31	2007 dyna wide glide When you turn the ignition switch on, can you hear the FI pump? Sorry, that last question was out of sequence. I will give you a list of things that have caused my bike not to start. 1. No gas in the tank. 2. Kill switch on off. 3. Forgot the passive alarm unit. It has to be close enough for the bike to read it. Yes, I've done this. 4. rode it in the rain and ruined the ignition coil. But that doesn't account for no fuel. 5. Water gets into the left side switch housing ('07 and later models have a killer in there to prevent starting in gear w/o the clutch disengaged) 6. Can you hear the FI pump when you turn on the ignition switch? JD Do you own/know how to use a multimeter? Last edited by glider; Nov 6th, 2009 at 11:43 PM. Reason: merged

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2007 dyna wide glide

Dyna Models