04-07 HD DTC Codes and Activation

glider · Oct 4th, 2009, 08:07 AM

Just because the pickup looks good doesn't mean it is. Usually if the pickup is bad the speedo will not register at all or bounce. Being stuck on 100MPH I would think it may be the speedo head.

scaraboy1 · Oct 10th, 2009, 08:17 PM

Quote:

Originally Posted by glider

Just because the pickup looks good doesn't mean it is. Usually if the pickup is bad the speedo will not register at all or bounce. Being stuck on 100MPH I would think it may be the speedo head.

Hi Glider,

I have issue misfiring when the Sporster getting hot!
CKP swapping with new one,same problem.....
Error code :U1300,U1301.
What that's mean.

Thanks

glider · Oct 10th, 2009, 08:27 PM

Quote:

Originally Posted by scaraboy1

Hi Glider,

I have issue misfiring when the Sporster getting hot!
CKP swapping with new one,same problem.....
Error code :U1300,U1301.
What that's mean.

Thanks

U1300 Serial Data Low TSM/TSSM.
U1301 Serial Data Open/High Carb

Could be a bad connection somewhere in the system. Possibly at the ECM plug or the serial data line on the back of the speedo.

slowhand · Nov 4th, 2009, 12:19 AM

Hi guys, hoping for a bit of help. I have an 04 FLHRCI with just under 50K miles.

Check engine light came on, bike ran fine for a bit then acted like it was fuel starved. Quit once, took a little while to get it started again an limped home.

Followed the instructions in the original post and received the following code -

P0118 ET Sensor Voltage Open/High EFI - It also gave what appears to be a part number - 32733-04A

Thanks in advance

jason

glider · Nov 4th, 2009, 07:50 AM

That code refers to the engine sensor which is located on the rear of the front cylinder head. It references a problem with the sensor or circuit that feeds the engine temp info to the ecm to supply fuel.

The other is a part number for the system (not the sensor)

slowhand · Nov 4th, 2009, 10:57 AM

Thanks for the quick info. Is it worth me just trying to replace the sensor (not sure how difficult that is) or would it be beneficial to run the bike into the shop and have them check the circuit and make sure there isn't some other problem?

Would you have a guestimate of the cost on this type of repair?

Thanks again for your help.

jason

glider · Nov 4th, 2009, 10:59 AM

It's not a difficult thing to replace the temp sensor. No idea of the cost and if you aren't comfortable with this sort of thing, I would run it into the shop.

slowhand · Nov 7th, 2009, 08:48 PM

Glider,

Just wanted to drop by and say a quick thanks for the help. I replaced the sensor myself and was able to clear the code and it now runs like a top. Saved myself a few dollars in diagnostic costs and I appreciate your assistance.

jason

glider · Nov 7th, 2009, 08:54 PM

Glad to hear it Jason. Money is better in your pocket than the dealers pocket.

Oct 4th, 2009, 08:07 AM	#70
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 20,467 My Mood:	Re: 04-07 HD DTC Codes and Activation Just because the pickup looks good doesn't mean it is. Usually if the pickup is bad the speedo will not register at all or bounce. Being stuck on 100MPH I would think it may be the speedo head.

Nov 4th, 2009, 12:19 AM	#73
slowhand New Family Ride: 2004 FLHRCI Join Date: Nov 4th, 2009 Posts: 3	Re: 04-07 HD DTC Codes and Activation Hi guys, hoping for a bit of help. I have an 04 FLHRCI with just under 50K miles. Check engine light came on, bike ran fine for a bit then acted like it was fuel starved. Quit once, took a little while to get it started again an limped home. Followed the instructions in the original post and received the following code - P0118 ET Sensor Voltage Open/High EFI - It also gave what appears to be a part number - 32733-04A Thanks in advance jason

Nov 4th, 2009, 07:50 AM	#74
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 20,467 My Mood:	Re: 04-07 HD DTC Codes and Activation That code refers to the engine sensor which is located on the rear of the front cylinder head. It references a problem with the sensor or circuit that feeds the engine temp info to the ecm to supply fuel. The other is a part number for the system (not the sensor)

Nov 4th, 2009, 10:57 AM	#75
slowhand New Family Ride: 2004 FLHRCI Join Date: Nov 4th, 2009 Posts: 3	Re: 04-07 HD DTC Codes and Activation Thanks for the quick info. Is it worth me just trying to replace the sensor (not sure how difficult that is) or would it be beneficial to run the bike into the shop and have them check the circuit and make sure there isn't some other problem? Would you have a guestimate of the cost on this type of repair? Thanks again for your help. jason

Nov 4th, 2009, 10:59 AM	#76
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 20,467 My Mood:	Re: 04-07 HD DTC Codes and Activation It's not a difficult thing to replace the temp sensor. No idea of the cost and if you aren't comfortable with this sort of thing, I would run it into the shop.

Nov 7th, 2009, 08:48 PM	#77
slowhand New Family Ride: 2004 FLHRCI Join Date: Nov 4th, 2009 Posts: 3	Re: 04-07 HD DTC Codes and Activation Glider, Just wanted to drop by and say a quick thanks for the help. I replaced the sensor myself and was able to clear the code and it now runs like a top. Saved myself a few dollars in diagnostic costs and I appreciate your assistance. jason

Nov 7th, 2009, 08:54 PM	#78
glider Community Liaison Ride: 07 Road King Classic Join Date: Jun 21st, 2007 Posts: 20,467 My Mood:	Re: 04-07 HD DTC Codes and Activation Glad to hear it Jason. Money is better in your pocket than the dealers pocket.

Tip Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-07 HD DTC Codes and Activation

Diagnostics and Fuel Injection Related