glider
07-18-2007, 01:07 PM
Here's the procedure for setting the transport mode with button type fobs...
http://i149.photobucket.com/albums/s45/bills985/alarmtransportmode.jpg
For BUTTON LESS fobs follow this procedure.
To enter transport mode.
1. Turn ignition switch to ignition.
2. Rock the engine OFF/RUN switch to OFF.
3. With the assigned FOB within range, turn the ignition key from OFF to ACCESS.
4. Simultaneously press both the left and the right turn signal signal switches. The turn signals will flash once.
5. Turn the ignition switch OFF to arm the system. The turn signals will flash 3 times as the system arms in the transport mode.
To exit transport mode.
With the FOB present, turn the ignition switch to IGNITION and the OFF/RUN switch to RUN. The system exits transport mode when the OFF/RUN switch is in RUN.
http://i149.photobucket.com/albums/s45/bills985/alarmtransportmode.jpg
For BUTTON LESS fobs follow this procedure.
To enter transport mode.
1. Turn ignition switch to ignition.
2. Rock the engine OFF/RUN switch to OFF.
3. With the assigned FOB within range, turn the ignition key from OFF to ACCESS.
4. Simultaneously press both the left and the right turn signal signal switches. The turn signals will flash once.
5. Turn the ignition switch OFF to arm the system. The turn signals will flash 3 times as the system arms in the transport mode.
To exit transport mode.
With the FOB present, turn the ignition switch to IGNITION and the OFF/RUN switch to RUN. The system exits transport mode when the OFF/RUN switch is in RUN.