Harley Davidson Forums - View Single Post - E-Z install pushrods

84FXRS · Jun 23rd, 2011, 12:50 PM

follow the instructions carefully... it will be tight when you do the adjustment. Then have a beer(critical step) then check, they should spin, as they did when you started at zero clearance. Dont forget to set at TDC on compression stroke. ( confirm by hold thumb over plug hole , you will feel compression build up). 2 1/2 turns = 15 flats on adjuster(scribe mark to keep count.) also hold threaded adjuster when you tighten jamb nut, then thouroughly retighten jamb nut

Jun 23rd, 2011, 12:50 PM	#2
84FXRS Warming The Wheels Join Date: Jan 6th, 2011 Location: New Jersey Posts: 91 My Mood:	Re: E-Z install pushrods follow the instructions carefully... it will be tight when you do the adjustment. Then have a beer(critical step) then check, they should spin, as they did when you started at zero clearance. Dont forget to set at TDC on compression stroke. ( confirm by hold thumb over plug hole , you will feel compression build up). 2 1/2 turns = 15 flats on adjuster(scribe mark to keep count.) also hold threaded adjuster when you tighten jamb nut, then thouroughly retighten jamb nut