Harley Davidson Community - View Single Post

glider · 05-09-2008, 02:15 PM

You may not have to remove the top pipe either, look at the link about cutting down the 1/4" allen key. I've done it like that before on a few bikes.

The bolts don't have to be removed from the cover, once broken loose you can un screw them by hand and lift the cover over the pipe with the bolts in the holes yet. Just reverse it to reinstall. Be careful to get the 3 balls in the ramp slots before replacing the ramp itself, it's easy, you'll see when you open it up. Do it on the side stand and you will not have to drain the trans.

05-09-2008, 02:15 PM	#4 (permalink)
glider Community Liaison Join Date: 2007, Jun 21 Posts: 9,076 My Mood:	Re: Clutchlite Easy Pull You may not have to remove the top pipe either, look at the link about cutting down the 1/4" allen key. I've done it like that before on a few bikes. The bolts don't have to be removed from the cover, once broken loose you can un screw them by hand and lift the cover over the pipe with the bolts in the holes yet. Just reverse it to reinstall. Be careful to get the 3 balls in the ramp slots before replacing the ramp itself, it's easy, you'll see when you open it up. Do it on the side stand and you will not have to drain the trans. __________________ Please stop by the "self help section" for maintenance tips, diagnostic codes and much more. >>Self Help Information and Tips<< click me!