Harley Davidson Community - View Single Post

Fearless1 · Mar 23rd, 2008, 02:00 PM

Well I tore off the top of the trany and found it not pushing the shifter cam far enough to engage it into 1st so low and behold I adjusted the shifter linkage tighter about 6 turns toss it back on and bamm it goes into first. Put it all back together then tested it all is well! The redline I put in the tranny is a bit noiser going into gear than it was though I will ride it a few days and see how it sounds. Thanks for all the help.

Mar 23rd, 2008, 02:00 PM	#22 (permalink)
Fearless1 Play The Throttle Join Date: Dec 13th, 2006 Location: Casa Grande, AZ Posts: 231 My Mood:	Re: Hard shift into first Well I tore off the top of the trany and found it not pushing the shifter cam far enough to engage it into 1st so low and behold I adjusted the shifter linkage tighter about 6 turns toss it back on and bamm it goes into first. Put it all back together then tested it all is well! The redline I put in the tranny is a bit noiser going into gear than it was though I will ride it a few days and see how it sounds. Thanks for all the help. __________________ "I inhale"!!!!!!!